Renesas Emulator System SH7362 Instrukcja Użytkownika Pobierz pdf (Strona 8)

E8a Emulator User's Manual Precautions for Safety

R20UT0541EJ0601 Rev.6.01 Page 8 of 124

Aug 25, 2011

CAUTION

Cautions to Be Taken for Turning On the Power:

Turn ON/OFF the power of the emulator and the user system as simultaneously as possible. If you

cannot turn on the powers simultaneously, turn on the emulator first and then the user system.

When turning on the power again after shutting off the power, wait about 10 seconds.

Cautions to Be Taken for Handling This Product:

Use caution when handling the product. Be careful not to apply a mechanical shock.

Do not touch the connector pins of the emulator and the target MCU connector pins directly. Static

electricity may damage the internal circuits.

When attaching and removing the cable, hold the plug of the cable and do not touch the cable. Do

not pull the emulator by the communications interface cable or the flexible cable. And, excessive

flexing or force may break conductors.

Do not flex the flexible cable excessively. The cable may cause a break.

Place the host computer and user system so that no cable is bent or twisted. A bent or twisted

cable will impose stress on the user interface leading to connection or contact failure. Make sure

that the host computer and the user system are placed in a secure position so that they do not

move during use nor impose stress on the user interface.

Note on Transporting the Product:

When sending your product for repair, use the packing box and cushioning material supplied with

the product when it was delivered to you and specify caution in handling (handling as precision

equipment). If packing of your product is not complete, it may be damaged during transportation.

When you pack your product in a bag, make sure to use the conductive plastic bag supplied with

the product (usually a blue bag). If you use a different bag, it may lead to further trouble with your

product due to static electricity.

Caution to Be Taken for System Malfunctions:

If the emulator malfunctions because of interference like external noise, do the following to remedy

the trouble.

(1) Exit the emulator debugger, and shut OFF the emulator and the user system.

(2) After a lapse of 10 seconds, turn ON the power of the emulator and the user system again,

then launch the emulator debugger.

Caution to Be Taken for Disposal:

Penalties may be applicable for incorrect disposal of this waste, in accordance with your national

legislation.

European Union regulatory notices:

The WEEE (Waste Electrical and Electronic Equipment) regulations put responsibilities on

producers for the collection and recycling or disposal of electrical and electronic waste. Return of

WEEE under these regulations is applicable in the European Union only. This equipment (including

all accessories) is not intended for household use. After use the equipment cannot be disposed of

as household waste, and the WEEE must be treated, recycled and disposed of in an

environmentally sound manner.

Renesas Electronics Europe GmbH can take back end of life equipment, register for this service at

“http://www.renesas.eu/weee

”.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 123 124

Komentarze do niniejszej Instrukcji

Brak uwag

Renesas Emulator System SH7362 Instrukcja Użytkownika Strona 8

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Renesas Emulator System SH7362