Renesas Emulator System SH7362 Instrukcja Użytkownika Pobierz pdf (Strona 63)

E8a Emulator User's Manual 5. Debugging

R20UT0541EJ0601 Rev.6.01 Page 63 of 124

Aug 25, 2011

Items that can be displayed in the sheet are listed below.

[Device] combo box Displays the MCU name.

[Emulation mode] combo box Selects the emulation mode at user program execution.

Select Normal to perform normal emulation.

Select No break to disable PC breakpoint or break condition settings during

emulation.

[User interface clock] combo box Displays the transfer clock of the user interface.

[Flash memory synchronization]

combo box

Selects whether or not the contents of the flash memory are acquired by the emulator

when the user program is stopped or the position where the PC break is set is put

back as the original code.

When the flash memory is not programmed by the user program, its contents need

not be acquired by the emulator.

If there is no problem with the state that the program in the flash memory has been

replaced as the PC break code, the position where the PC break is set needs not be

put back as the original code.

Disable: Read or program is not performed for the flash memory except when the

emulator is activated, the flash memory area is modified, and the settings

of the PC break to the flash memory area are changed.

PC to flash memory: When the user program is stopped, the specified PC break

code is replaced as the original instruction. Select this option

if there is a problem with the state that the program in the

flash memory has been replaced as the PC break code.

Flash memory to PC: When the user program is stopped, the contents of the flash

memory are read by the emulator. Select this option if the

flash memory is reprogrammed by the user program.

PC to flash memory, Flash memory to PC:

When the user program is stopped, the contents of the flash memory are read by the

emulator and the specified PC break code is replaced as the original instruction.

Select this option if the flash memory is reprogrammed by the user program and

there is a problem with the state that the program in the flash memory has been

replaced as the PC break code.

Note: This dialog box differs depending on products. For details, refer to the online help.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 123 124

Brak uwag

Renesas Emulator System SH7362 Instrukcja Użytkownika Strona 63