
M306H5T3-RPD-E User’s Manual 5. Troubleshooting
REJ10J0866-0100Z Rev.1.00 Dec.16, 2004
Page 61 of 66
5.2.2 Program Window is Not Displayed at Debugger Startup (Target Connected)
Table 5.2 Checkpoints of errors when starting up the emulator debugger (target connected)
Error Checkpoint
ERROR 16005:
Can't connect with the target.
(1) Check the connection between the PC4701 and host machine.
See the PC4701 User's Manual.
(2) Check that the PC4701 is powered on.
See the PC4701 User's Manual.
(3) Check that all switch settings on the rear of the PC4701 and
interface cable settings of the emulator debugger match.
See the PC4701 User's Manual and the emulator debugger user's
manual (online manual).
ERROR 16211:
The version of M3T-PD30 and the firmware
on the target are not same.
(1) Check the connection between the PC4701 and this product.
See “2.8 Connecting the PC4701” (page 33)
(2) Download the proper firmware.
See "3.3 Downloading Firmware" (page 39).
(3) Choose the proper MCU file in the Init dialog box.
See the emulator debugger user's manual (online manual).
(4) Check that the descriptions in the MCU file are correct.
See "3.1.1 Making an MCU File" (page 36).
ERROR 16215:
Cannot communicate with the debugging
monitor.
(1) Check the connection between the PC4701 and this product.
See “2.8 Connecting the PC4701” (page 33)
(2) Check the reset pin of the user system is held high.
See the MCU specifications.
(3) If the CNVSS is held high at startup, check that pins HOLD* and
RDY* are held high, too.
See the MCU specifications.
(4) Check that the oscillator circuit of the emulation pod is oscillating
properly.
See "2.3 Selecting Clock Supply and Replacing Oscillator Circuit
Boards" (page 22)
ERROR 16014:
Communication ERROR.
Can't accept data.
(1) Check that the oscillator circuit of the user system is oscillating
properly.
See "2.3 Selecting Clock Supply and Replacing Oscillator Circuit
Boards" (page 22).
(2) Check that the PC4701 LEDs at startup show normal operation.
See "3.2.3 LED Display When the Emulator Starts Up Normally"
(page 38).
ERROR 16231:
There was sent undefined data from
PC4700.
Check that the emulator debugger has not been started up without
shutting down the PC4701.
See "4.6 IMPORTANT: Note on Quitting the Emulator Debugger"
(page 54).
Komentarze do niniejszej Instrukcji