Renesas SDI Emulator System M32100T-EZ-E Instrukcja Użytkownika Pobierz pdf (Strona 14)

32185/32186/32192/32195/32196 Group

Starter Kit User’s Manual M3A-2154G52B

REJ10B0223-0140/Rev.1.40 Jan. 2007 Page 8 of 79

3.5 About Evaluation Board

When the evaluation board does not start operation after supplied power, check the following

points.

3.5.1 Contact failure of IC Socket

Oscillation or thermal expansion may cause a poor connection between microcomputers and IC

socket on the Evaluation Board. Follow the steps below.

- Screw down the top cover of IC socket with setscrews at four corners.

The tightening torque shall be 0.054N.m.

Note that only one tight setscrew may cause a poor connection.

The socket included in the evaluation board uses NQPACK and HQPACK by TOKYO ELETECH

CORPORATION.

For more details, visit their website at http://www.tetc.co.jp/e_index.htm.

The following illustrates configuration of M3A-2154G02A (32185/32186/32192/32195/32196

Group Evaluation Board).

Figure 3.2 Configuration of M3A-2154G02A

3.5.2 Cable Connection

- Make sure the cables are connected to the evaluation board firmly.

32185/32186/32192/32195/32196 Group evaluation board M3A-2154G02A

IC socket (HQPACK)

Setscrews on cover

of IC socket

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 88 89

Brak uwag

Renesas SDI Emulator System M32100T-EZ-E Instrukcja Użytkownika Strona 14