Renesas Emulator System SH7362 Informacje Techniczne Pobierz pdf (Strona 34)

Usage Example of Sequential Break Extension Setting: A tutorial program provided for the

product is used as an example. For the tutorial program, refer to section 6, Tutorial, in the

SuperH

Family E10A-USB Emulator User’s Manual.

The conditions of Event Condition are set as follows:

1. Ch1

Breaks address H’00001068 when the condition [Prefetch address break after executing] is

satisfied.

2. Ch2

Breaks address H’00001058 when the condition [Prefetch address break after executing] is

satisfied.

3. Ch4

Breaks address H’0000107a when the condition [Prefetch address break after executing] is

satisfied.

4. Ch10

Breaks address H’00001086 when the condition [Prefetch address break after executing] is

satisfied.

Note: Do not set other channels.

5. Set the [CPU Sequential Extend] page as shown in figure 2.1.

Then, set the program counter and stack pointer (PC = H’00000800, R15 = H’00010000) in the

[Registers] window and click the [Go] button. If this does not execute normally, issue a reset and

execute the above procedures.

The program is executed up to the condition of Ch10 and halted. Here, the condition is satisfied in

the order of Ch2 -> 1 -> 4 -> 10.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 65 66

Brak uwag

Renesas Emulator System SH7362 Informacje Techniczne Strona 34