Renesas Emulator System E8 Dokumentacja Pobierz pdf (Strona 23)

Renesas E8 Emulator

Introductory Guide for H8/300H Tiny

6. Let's Try Using the E8 Emulator

This section describes the basic usage of the E8 emulator with regard to the sample program in the supplied CD-ROM.

6.1 Before Starting

6.1.1 Checking the Software

This example uses the C compiler, High-performance Embedded Workshop, and the E8 emulator software supplied

with the emulator. Be sure to check that the software is installed in the computer before using the emulator. If any

software is not installed, install it as described in section 4, Installing the Software.

6.1.2 Checking the Connections

Before using the E8 emulator, be sure to check that the host computer, USB cable, E8 emulator, user system interface

cable, and CPU board (SKPH8TINY) are connected as shown in figure 6.1. If the connections are not complete,

connect them as shown in the figure.

Figure 6.1 Checking the Connections

6.2 Activating the High-performance Embedded Workshop

6.2.1 Activating the High-performance Embedded Workshop

Activate the High-performance Embedded Workshop by opening the [Start] menu and selecting [All Programs],

[Renesas], [High-performance Embedded Workshop], and [High-performance Embedded Workshop] in that order.

Figure 6.2 Activating the High-performance Embedded Workshop

This guide shows an example where the High-performance Embedded Workshop has been updated to V.4.01.xx

through the Renesas website.

REJ06J0008-0100/Rev.1.00 March 2007 Page 21 of 43

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Brak uwag

Renesas Emulator System E8 Dokumentacja Strona 23