Renesas TFP-100G Informacje Techniczne

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

IIIState Law:Some states do not allow the exclusion or limitation of implied warranties or liability forincidental or consequential damages, so the ab

IVSAFETY PAGEREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for future ref

VWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD and will damage the usersystem and the emulator product or

iPrefaceThank you for purchasing this user system interface cable (HS2268ECN61H) for the Hitachi’soriginal microcomputer H8S/2268 series.The HS2268ECN

iiContentsSection 1 Configuration...1Section 2 Connection Proced

1Section 1 ConfigurationCAUTIONUse an NQPACK100SE socket (manufactured byTokyo Eletech Corporation) for the TFP-100Gpackage IC socket on the user s

2Table 1 lists the HS2268ECN61H components. Please make sure you have all of thesecomponents when unpacking.Table 1 HS2268ECN61H ComponentsNo. Compon

3Section 2 Connection Procedures2.1 Connecting User System Interface Cable to Emulator StationWARNINGObserve the precautions listed below. Failure

4Figure 2 Connecting User System Interface Cable to Emulator Station

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

52.2 Connecting User System Interface Cable to User SystemWARNINGAlways switch OFF the user system and the emulatorproduct before the USER SYSTEM INTE

6Figure 3 Location Setting of IC Socket

72.2.2 Soldering IC SocketAfter fastening, solder the IC socket for a TFP-100G package to the user system.CAUTIONBe sure to completely solder the lead

82.2.4 Fastening Cable HeadCAUTION1. Use a screwdriver whose head matches the screw head.2. The tightening torque must be 0.054 N•m or less.If the app

9Fasten the user system interface cable head to the IC socket for a TFP-100G package on the usersystem with the four screws (M2.0 x 10 mm) provided.

102.2.5 Fastening Cable BodyConnect the cable body to the cable head.Cable bodyCable headRemove jigPush the remove jigRemovingUser systemFigure 5 Fast

112.3 Recommended Dimensions for User System Mount PadFigure 6 shows the recommended dimensions for the mount pad (footprint) for the user systemwith

122.4 Dimensions for User System Interface Cable HeadThe dimensions for the user system interface cable head are shown in figure 7.Figure 7 Dimensio

132.5 Resulting Dimensions after Connecting User System Interface CableThe resulting dimensions, after connecting the user system interface cable head

14Section 3 Installing the MCU to the User SystemCAUTION1. Check the location of pin 1 before inserting.2. Use a screwdriver whose head matches the

Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.The semiconductor operati

15Figure 9 Installing MCU to User System

16Section 4 Verifying Operation1. When using the E6000 emulator for the H8S/2268 series, turn on the emulator according to theprocedures described i

17Section 5 Notice1. Make sure that pin 1 on the user system IC socket is correctly aligned with pin 1 on the cablehead before inserting the cable h

Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products bett

H8S/2268 Series TFP-100GUser System Interface Cable (HS2268ECN61H) for E6000 EmulatorUser’s ManualUser’s Manual Rev.1.0 2002.02

Cautions1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’spatent, copyright, trademark, or other intellec

IIMPORTANT INFORMATIONREAD FIRST• READ this user's manual before using this user system interface cable.• KEEP the user's manual handy for f

IILIMITED WARRANTYHitachi warrants its user system interface cables to be manufacturedin accordance with published specifications and free from defect