Renesas Emulator System E8 Podręcznik Użytkownika Pobierz pdf (Strona 17)

CSE8E10-2

Introduction to C-SPY® hardware debugger systems

3 Build the project if it has not been built and choose Project>Debug to start C-SPY.

4 The Emulator Setting dialog box is displayed.

Figure 2: The Emulator Setting dialog box for the E8a emulator

Select your MCU group and device from the drop-down lists. The following items can

also be selected on the Emulator Mode page:

E8/E8a Emulator option Description

Erase Flash and Connect Erases the flash memory data for the MCUs and simultaneously

writes the E8/E8a emulator firmware.

Keep Flash and Connect Retains the flash memory data for the MCUs.

Note: The area for the E8/E8a emulator firmware and the vec-

tor area used by the E8/E8a emulator will change.

Program Flash Writes your application to the flash memory. Debugging of the

application is disabled. Select this mode when using the E8/E8a

emulator as a flash memory programmer.

Note: It is necessary to input the ID code of the flash memory

to the target device.

Table 4: The E8/E8a emulator mode options

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Brak uwag

Renesas Emulator System E8 Podręcznik Użytkownika Strona 17