Renesas MCU Board for 4513/4514 Group MCUs M34514T-MCU Instrukcja Użytkownika Pobierz pdf (Strona 21)

( 21 / 42 )

4.5 Connection to the Target System

(1) For 4514 Group

When connecting the M34514T-MCU board to the target system:

a. Connecting to 2.54-mm-pitch Dual-in-line Pins on the Target System

Use the 50-wire normal-pitch cable (included) to connect the 50-pin dual-in-line pins on the

target system. Following products are required for connection to the target system.

• 100-wire half-pitch cable (40 cm)

• PCA4029 pitch converter board

• 50-wire normal-pitch cable (10 cm)

Figure 4.8 depicts the M34514T-MCU board connected to the target system using the 50-wire

normal-pitch cable. Table 4.8 lists the connector signal assignments of the 50-wire normal-pitch

cable. Figure 4.9 shows the pin layout of the 50-wire normal-pitch cable.

Figure 4.8 Connection to the target system using dual-in-line pins

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Brak uwag

Renesas MCU Board for 4513/4514 Group MCUs M34514T-MCU Instrukcja Użytkownika Strona 21