Renesas FP-256H Informacje Techniczne

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

42. After checking the location of pin 1 on the IC socket connector and pin 1 on the IC socket,align the guide pins on the IC socket connector with th

52.1.3 Fastening IC Socket ConnectorCAUTION1. Use a hexagonal wrench (φ 1.5 mm).2. Stop tightening when the force required to turn the screwbecomes s

62.2 Exchanging the Spacer of the EV-Chip BoardWhile the user system interface board is connected to the user system, force must not applied tothe use

72.3 Connecting User System Interface Board to EV-Chip BoardWARNINGObserve the precautions listed below. Failure to do sowill result in a FIRE HAZARD

8Connector No.UCN1 UCN1UCN2 UCN2BoardEV-Chip Board Connector No.Board Connector No.EV-chip boardFigure 5 Connecting User System Interface Board to E

92.4 Recommended Dimensions for User System Mount Pad (Footprint)Figure 6 shows the recommended dimensions for the mount pad (footprint) for the user

102.5 Dimensions for EV-Chip Board and User System Interface BoardThe dimensions for the EV-chip board and the user system interface board are shown i

112.6 Resulting Dimensions after Connecting User System Interface BoardThe resulting dimensions, after connecting the user system interface board to t

12Section 3 Verifying Operation1. Turn on the emulator according to the procedures described in the SH7058 E6000H EmulatorUser's Manual (HS7058

13 To use the crystal oscillator mounted on the EV-chip boardInstall a crystal oscillator into the crystal oscillator terminals on the EV-chip board

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

14Section 4 Notice1. The MCU cannot be installed directly into the IC socket provided for connecting this usersystem interface board.2. Before conne

SH7058 Group FP-256HUser System Interface board HS7058ECF61H User's ManualPublication Date: Rev.6.00, Janua

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanSH7058 Group FP-256HUser System Interface BoardREJ10B0089-0600HHS7058ECF61H User

SH7058 Group FP-256HUser System Interface BoardHS7058ECF61H User’s ManualUser’s Manual Rev.6.0 2004.01Renesas Microcomputer Development Environment

CautionsKeep safety first in your circuit designs!1. Renesas Technology Corp. puts the maximum effort into making semiconductor productsbetter and mor

iPrefaceThe HS7058ECF61H is a user system interface board that connects a user system for the SH7058FP-256H package to the SH7058 E6000H emulator (HS7

iiContentsSection 1 Configuration...1Section 2 Connection Proced

1Section 1 ConfigurationFigure 1 and table 1 show the configuration and components of the user system interface board forthe FP-256H package. Pleas

2CAUTIONUse a TQPACK256RD socket and a TQSOCKET256RDP(manufactured by Tokyo Eletech Corporation) for theFP-256H package IC socket and IC socket connec

3Section 2 Connection Procedures2.1 Connecting User System Interface Board to User SystemWARNINGAlways switch OFF the user system and the emulatorpr